0-10V 3 channel LED Controller – AM3
AM3 – 3 channel 0-10V Controller.
The AM3 is a 3-channel, modular controller board that accepts 3x 0-10V inputs and outputs digital dimming levels to drive any of MegaLED’s modular output cards. Inputs 1, 2 and 3 represent Red, Green and Blue outputs respectively. Also available in a version where one analogue input controls all 3 outputs to same level; useful for controlling large amounts of monochromatic leds.
A 10V output optionally allows the use of potentiometers to control the inputs instead of 0-10V signals. Output cards can be daisy chained into the AM3 and mixed and matched together delivering virtually limitless output drive capacity for all types of LED fixtures.
Need help selecting the best LED light control system?
Please don’t hesitate to call us today on: +44 (0) 208 432 0995
or send your enquiry here.
AM3 Features:
Allows newer LED’s to interface to older analog control systems.
10V output to power external potentiometer controls.
Supports any type of LED with the appropriate output card.
10-bit resolution sampling of input signals.
10-bit PWM outputs on all 3 channels.
Wide input supply range – 12 to 24V.
Small form factor.
AM3 0-10V Controller Card | Specifications:
Size: 36.2 x 61.6mm (PCB), 14mm max. above PCB.
Fixings: 4x 3.25mm holes on 29.84 x 55.24mm centres.
Weight: 20g approx.
Voltage requirement: 12 to 24Vdc.
Power connection: 2.1mm ‘barrel’ type power socket, positive centre.
Quiescent current: 30mA (typ.) at 24Vdc.
Signal input connections: Screw terminals, 3.81mm pitch.
Signal output connections: 10 way box header.
AM3 0-10V Controller Cards – Mode
Standard Build 3ch. / RGB 0-10V Controller Version:
Connect 3 x 0-10V signal lines to marked input terminals, connect suitable
LED Driver cards into modular controller 10way header, power both devices.
Monocromatic Build 1 channel input, 3 outputs:
Connect 1 x 0-10V signal lines to marked input terminal “IN1”, connect suitable
LED Driver cards into modular controller 10way header, power both devices.