VDRIVER LED VOLTAGE DRIVER CARD 0-24V LED FIXTURES 3ch.

Description:
A 3-channel, modular voltage output board with high current output capacity (15A). Drives voltage-LED Fixtures, 0-24V.

Designed for use with MegaLED's modular controllers such as the AM2.
These boards, can be daisy chained with other output cards of different types for maximum flexibility and system expandability.

Features:

5 Amps output per channel (15A total per board)

Can be used with any LED supply voltage from 0 to 24V (up to 50V available on request)

Individually fused outputs with sockets

Daisy-chain for infinite output capability

Can be mixed with other output cards for different LED combinations

Small form factor

Supports separate or Common Anode LEDs (common cathode version available)

Specifications:

Size: 60.96 x 38.1mm (PCB), 14mm max. above PCB.

Fixings: 3x 3.1mm holes.

Weight: 25g approx.

Voltage requirement: Anything between 0 to 24V, to suit LED load.

Power connection: 2x Screw terminals, 5mm pitch.

Output connection: 4x Screw terminals, 5mm pitch.

Quiescent current: <1mA (circuit powered from controller).

Signal input connections: 10 way header mounted on ribbon cable.

Signal output connections: 10 way box header.

Fuses: Round replaceable fuses.
F1,2,3= 5Amp rated as standard lower rated fuses also available.

VDRIVER is a LED Output card designed to plug
into our modular controllers like the AM2.

It does not have DMX or any inbuilt programming
features.

VDRIVER | MODULAR