PDRIVER1 350-1000mA PowerLED Driver RGB 3ch

Description:
DVR1-RGB is a 3 Channel (RGB) modular output driver board for power LEDs such as Luxeon 1, 3 and 5 Watt devices. The driver boards form a system with our modular controllers, accepting control signals from our range of modular control cards, including AM2,AM3, modular crossfaders, DMX-1 etc"

Features:

24Vdc supply voltage

Fused power input

Various configurations available to suit specific LEDs (specify when ordering)

Constant Current driving or ‘Constant Power’ output depending on configuration

Powers 2 to 12x 1-Watt LEDs (350mA)

Powers 1 to 5x 3-Watt LEDs (500 or 700mA)

Powers 1 to 4x 5-Watt Luxeon LEDs (700mA)

Cooling should considered for higher power loads

Daisy-chain for infinite output capability

Can be mixed with other output cards for different LED combinations

Small form factor

Specifications:

Size: 77 x 91mm (PCB), 15mm max. above PCB.

Fixings: 4x 3mm holes. Centres: 69.85mm & 83.19mm

Weight: 68g approx.

Voltage requirement: 24Vdc.

Power connection: 2x Screw terminals, 5mm pitch.

Output connection: 6x Screw terminals, 5mm pitch.

Quiescent current: 2mA approx.

Signal input connections: 10 way header mounted on ribbon cable.

Signal output connections: 10 way box header.

Fuses: FUSE TYPE DEPEND ON CONFIGURATION.

The DVR1-RGB is a modular PowerLED Output card designed to plug into our modular controllers like the AM2 & AM3. Accepting signals from these modular input controllers, the DVR1 does the output driving only.

DVR1-RGB PowerLED Output Card