MegaLED's DMX-Splitter

Features:
 USITT DMX512 / 1990 (4µSec) compliant
 RS485 compliant
 Full isolation for maximum reliability
 4 outputs isolated from each other
 Outputs isolated from input
 Inputs and outputs isolated from power supply
 Available for various power supply voltages
 On-board selectable input terminate (120 Ohm)
 Power and Data indicator LEDs

Specifications:

Size: 61.0 x 92.7mm (PCB), 10mm max. above PCB.

Fixings: 5x 3.25mm holes on 53.34 x 85.09mm centres.

Weight: 53g approx.

Voltage requirement: 5V, 12V, 15V, or 24V (specify when ordering).

Power connection: 2x Screw terminals, 5mm pitch.

Quiescent current: ~250mA at 5Vdc (no DMX signal).

DMX connections: 5 sets of 3x Screw terminals, 5mm pitch.

DMX input load: 1x RS-485 load unit.

DMX output capability: 31 RS-485 load units.
The DMX Splitter is a DMX Signal Booster and Signal Splitter.

Simply connect your DMX signal to the DMX IN of the splitter,
then use DMX signal outputs lines 1-4 to split the signal to each output group of your DMX LED Drivers / Fixtures.

To complete signal line splitting and DMX daisy-chain circuit,
each DMX output (1-4) must be terminated at the end of
the chain (e.g. on last led driver connected).