DMX-75 - The Decoder board:
USITT DMX512 / 1990 (4μSec)
compliant
Optional RS232 interface
Fully selectable DMX base address
On-board terminate setting (120
Ohm)
Full isolation from DMX connection
for maximum reliability
Power and Data indicator LEDs
Built in stand-alone programs
Wide input voltage range - 7 to
36V
Ribbon cable connection to driver
boards
Option 1: DMX75-D25P3
25 Channel PowerLED Output Driver
Boards, 350mA LEDs:
25 channels of current regulated
outputs
12 to 24Vsupply voltage
350mA
output (at full load allow adequate air cooling)
Max of 3 boards per DMX-75
system.
Screw terminal outputs
Option 2: DMX75-D25P7
25 Channel PowerLED Output Driver Boards, 700mA LEDs:
25 channels of current regulated
outputs
12 to 24Vsupply voltage
700mA
output (may require moving air cooling)
Max of 3 boards per DMX-75
system.
Screw terminal outputs
Option 1: DMX75-D25VL
25 Channel Voltage Output Driver
Board: L=0.5A/25A
25 channels of
voltage outputs
Max 3 boards or 75 channels per
system.
Fused outputs
7 to 30V supply voltage (higher
available on request)
0.5A Output current per channel (low
output version)
25A total per board.
Screw terminal outputs
Option 2: DMX75-D25VH
25 Channel Voltage Output Driver
Board: H=5A/25A
25 channels of
voltage outputs
Max 3 boards or 75 channels per
system.
Fused outputs
7 to 30V supply voltage (higher
available on request)
5A Output current per
channel max (high output)*
* 25A total per board.
Screw terminal outputs
Option 3: DMX75-D75VL Channel V-Driver board:
All-in-one 75
Channel Voltage Output Driver Board:
75 channels of voltage outputs.
All 75 channels contained on one
card
Available with or without fuses, in
socket or SM-1206.
12 to 50Vsupply voltage
150mA Output current per channel
(constant)
250mA Output current per channel
(peak)
Outputs grouped into 25’s with
separate power inputs,
allowing for mixed supply voltage systems.
Ribbon cable outputs for easy
installation.
