AM2 Stand Alone Led Controller | Features:
> Modular 3 Channel controller for mixed system led fixtures.
> RGB Colour Changing, Programme built in
> Selection of Programmes available
> High current fused outputs
> Almost infinite expandability modular outputs.
> Speed and Brightness settings
> Ease of Use
> Proven, incredibly reliable
> Custom builds & programming available
> Fits into standard double gang wall plate
> Ideal for Illuminating RGB LED Light Bars
> Ideal for Illuminating LED Sign Lighting Modules.
AM2 Modular Led Controller | Specifications:
Size: 63 x 95mm (PCB).
Fixings: 5x potentiometer shafts if panel mounted or 4x 3.25mm holes.
Weight: 80g approx.
Colour change mode speed:
Loop times adjustable between 7s to 30m.
Power connection: 2x Screw terminals.
Input voltage: 7-24Vdc, voltage to suit LED loads.
Output current: 5.0A maximum (fused) per channel.
Output voltage: Same as input voltage.
PWM Frequency: 250Hz (or 1kHz).
Control resolution: 256 step / 8-bit.
AM2 Modular Led Controller | Operation:
Two modes of operation allow for static (adjustable steady colour / brightness) and RGB
colour changing effects.
The standard colour change pattern is MegaLED’s C14 pattern that goes round the full colour
circle, taking equal time to change through each of the following colours: Blue, Blue Cyan,
Cyan, Green-Cyan, Green, Yellow-Green, Yellow, Orange- Yellow, Orange, Red, Pink,
Red-Magenta, Magenta, Magenta-Blue.
A random start colour is chosen when colour-change mode is entered.
Static mode allows precise setting of brightness in Red, Green and Blue channels.
Additionally, a brightness control is available allowing overall dimming without changing
colour. This control is available in both modes of operation.
The mode is selected by a momentary push switch, and the current mode is displayed through
a red and green on-board LED.
On power up, the controller will be in the same mode it was last set to. Other and custom
LED Lighting programmes can be created and embedded into the AM2 chip, on request.
Order Options
AM2-O OEM Version with no faceplate.
AM2-F Faceplate Version, fits into double UK gang plate.
VDRIVER & PDRIVER Output cards to increase LED Driving
capacity.
