Analog Multi Function 0-10V LED Controller,2channel

Features:
 Allows LEDs to interface to older analog control systems.
 10V output to power external potentiometer controls.
 Multiple programs within a single controller.
 Supports any type of LED with the appropriate output card.
 10-bit resolution sampling of input signals.
 Wide input supply range - 12 to 24V.
 Small form factor.

Specifications:
Size: 36.2 x 61.6mm (PCB), 14mm max. above PCB.
Fixings: 4x 3.25mm holes on 29.84 x 55.24mm centres.
Weight: 16g approx.
Voltage requirement: 12 to 24Vdc.
Power connection: 2.1mm ‘barrel’ type power socket, positive centre.
Quiescent current: 25mA (typ.) at 24Vdc.
Signal input connections: Screw terminals, 3.81mm pitch.
Signal output connections: 10 way box header.

Input 1 function:
0 to 2.5V selects ‘C14’ colour fade program.
2.5 to 5V selects ‘Random’ colour change program.
5 to 7.5V selects ‘Lucifer’ colour fade program.
7.5 to 10V selects ‘Static colour’ mode.

Input 2 function:
C14 mode: Sets loop speed. 0V = 18 sec, 10V = 75 min.
Random mode: Sets colour change speed 0V = min, 10V = max.
Lucifer mode: Sets loop speed. 0V = 15 sec, 10V = 49 min.
Static mode: Sets static colour. 0V is half way between Blue and
Red, moving through Red, Green, Blue, Pink and to White at 10V.

Standard LED Programme Sheet here 

Custom programming also available on request.